Hello Guys,
Welcome to Learn more with tech and for taday i am going to tell you guys that the users using Galaxy Grand Prime G531H to The Brand New galaxy J3 SM-J320H.
At First you guys need to know that why choose this rom or firmware in place of G531H.
Here are some of the additives from the roms:
1. Its Theme Store, that allows you to install variety of themes from Samsung.
2. Its Look, You guys already know that J3 look is very attractive and is one of the best performing mobiles from Samsung at this range.
3. Its Camera app, i loved the camera app of this version and i strongly recommend you.
4. Pre-Rooted, Guys If you are unable to root G531H then it might be the rom you are looking for as it is pre-rooted and gives you variety of access with the files.
 |
| Change firmware |
To Install the ROM follow my guidelines below:-
At first you need to have a Galaxy Grand Prime G531H Mobile and Secondly, you shoild install TWRP Recovery.
To Install TWRP Recovery.
---If you do not have the custom recovery yet in you device then click in the link below:
---Download the file from above link and extract it. you can find Samsung USB Driver, Odin and TWRP-tar.md5 file.
---Install Samsung USB Drivers and Open Odin.
---On your device power off the phone and press volume down + Home +Power Button at same time and enter the download mode.
---Connect your Device to Pc with a well working data cable and after you connect you can see a blue in the top left corner of odin and added in comment box in odin.
---Then click the AP button on odin and select the TWRP- tar.md5 file you extracted.
---Now Click Start and wait for the process to complete. Don't disconnect your phone during installtion and after the successfull process the upper blue box will turn to green saying PASS.
---Then Disconnect your phone and enter the recovery mode and you will see TWRP recovery installed.
Well my preferred twrp for custom recovery users is
After you have recovery installed or Had one earlier
To Install The rom
1. At first download the J3 Powered rom file from the link below:
2. Secondly, Copy the downloaded ROM file from above link to your SD Card.
3. Boot your device in Recovery mode and at first you should wipe you data, Cache, Dalvik Cache, internal Storage from the wipe/ Reset/ Advance Menu.
4. After Wipe, Go to Install / Install Zip menu and select the storage location to your SD Card and select the ROM file you Copied.
5. If you have Verify Zip Signature enabled, I recommend not enabling it.And the process will start to install your Rom.
6. After finishing installation, you might be asked to install Super Su and if you are going to need root access you can install it otherwise don't install and reboot your device.
7. The first boot can have long time to boot about 2-4 minutes and after the successful installation of apps the device will boot Fully J3 Powered.
Thankyou guys for watching this and visiting my blog and i would like to hear from you so guys let me know in my email:-surajparajuli318@gmail.com and remain connected so let me know and don't forget to subscribe me
